The iScan silo is for products flowing inside a holding bin, buffer or silo. The sensor is simply mounted on the side of the silo wall, allowing products to flow between the sensor and reflector area.
Moisture (%), density (g/l) and temperature (°C or F) of the material being measured are immediately displayed. The system can store measurements on a flash-card memory chip that can be easily removed from it and connected to a PC computer for further analysis or data collection. Remote control of settings and data storage are done via Ethernet.
iScan sensor.
Main display.
Ethernet remote control and data storage.
Specifications
Accuracy
+/- 0,5% or better compared to standard dry oven method
Density accuracy
+/- 15g/l
Measurement range
0-90% moisture content, depending on application.
Measurement update
1-30 seconds (adjustable
Calibration settings stored
Unlimited
Network
Ethernet connectivity
Measurement output
Industry standard 4-20mA and 0-5V outputs for moisture, temperature or density
Digital IO
Multiple in- and outputs
Data storage
Locally with a removable flash disk, anywhere remotely with a network connection
The iScan Online is intended for products flowing on a non-metallic conveyor belt.
Moisture (%), density (g/l) and temperature (°C or F) of the material being measured are immediately displayed. The system can store measurements on a flash-card memory chip that can be easily removed from it and connected to a PC computer for further analysis or data collection. Remote control of settings and data storage are done via Ethernet.
Specifications
Accuracy
+/- 0,5% or better compared to standard dry oven method
Density accuracy
+/- 15g/l
Measurement range
0-90% moisture content, depending on application.
Measurement update
1-30 seconds (adjustable
Calibration settings stored
Unlimited
Network
Ethernet connectivity
Measurement output
Industry standard 4-20mA and 0-5V outputs for moisture, temperature or density
Digital IO
Multiple in- and outputs
Data storage
Locally with a removable flash disk, anywhere remotely with a network connection
The iScan pipe is for liquid products flowing inside a pipe or a tube. The microwave transmission sensor is simply mounted inside the pipe, into the process for direct moisture - or dry substance - measurement in real time.
The system measures microwave attenuation, and microwave phase change in material compared to air. The main display screen immediately shows moisture content, or dry substance, in percentage.
Click to enlarge
Main display of the iScan
Ethernet remote control and data storage.
Specifications
Accuracy
+/- 0,5% or better compared to standard dry oven method
Measurement range
0-90% moisture content, depending on application.
Measurement update
1-30 seconds (adjustable)
Calibration settings stored
Unlimited
Network
Ethernet connectivity
Measurement output
Industry standard 4-20mA and 0-5V outputs for moisture, temperature or density
Digital IO
Multiple in- and outputs
Data storage
Locally with a removable flash disk, anywhere remotely with a network connection
.png?m50){kind=small}
